CNC-machined alu brace post for Active Rear Suspension (ARS™) rear suspension. 

Molded composite steering block of ‶hard※ hardness (H) for foam-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for rubber tires. Fits XRAY T2, T3 cars. 

Precision-machined bushing for front C-hub steering block pivot screws on XRAY T2, T3. Includes 4 pieces: 2 short + 2 long. 

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302364. Can be also used for foam tires. 

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302363. Can be also used for foam tires. 

Molded composite C-hub for right steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching left-side C-hub #302370. 

Molded composite C-hub for left steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching right-side C-hub #302369. 

Molded composite 4.9mm ball joints, open on both sides, for connection to 4.9mm ball. Set of eight. Fits XRAY T2, T3. 

Front anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 4mm thick. Black color, set of 10. 

Molded composite set of wheelbase shims, includes 3x6x2mm shims (qty 2), and 3x6x1mm shims (qty 6). 

Adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Precision hreading for fine toe adjustment.
 

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled ‶H※) specially optimized for foam-tire racing. Use on both left and right sides of the car. Can be also used for rubber tires. 

Alu bushing for ball-bearing anti-roll bar system. 

Molded composite 4.9mm ball joint for anti-roll bar linkages includes hole for M3x4 setscrew. Allows height adjustment of anti-roll bar linkages. Set of 4. 

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  

Hudy Spring Steel™ drive shaft coupling for Set Screw for increased reliability, works in front and rear CVD drive shafts of XRAY T2, T3. Specially hand-ground for maximum precision.  

Low friction 3.5mm drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of 4. For use only with T2'008 XRAY alu ball-diffs or Multi-Diff™. 

CNC-machined 50mm drive shaft for XRAY T2,T3 made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY.  

CNC-machined 52mm CVD drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.  

Super-lightweight 50mm alu drive shaft CNC-machined from premium Swiss 7075 T6 and hardcoated for extra durability and stylish looks. New design is up to 40% lighter than steel drive shaft. 

Super-lightweight drive axle for XRAY T2, T3 CNC-machined from world-renowned, top-secret HUDY Spring Steel™. Reduces rotating weight by up to 35% over standard outdrive. 

CNC-machined clamping-style alu wheel hubs for XRAY T2, T3. Set of two. Black colour. 

Polished chrome pin for CVD drive shaft, 2 x 10mm. Specially hand-ground for maximum precision. 

Front lower outer pivot pins for XRAY T2, T3. Hardened for very high durability and long life. Set of two. 

Rear lower outer pivot pins for XRAY T2, T3. Hardened for very high durability and long life. Set of two. 

Threaded 4.9mm ball end with 5mm thread length for connection to molded ball joints. Set of 2. 

Threaded 4.9mm ball end with 6mm thread length for connection to molded ball joints. Set of 2. 

Threaded 4.9mm ball end with 8mm thread length for connection to molded ball joints. Set of 2. 

Threaded 4.9mm ball end with 10mm thread lengthfor connection to molded ball joints. Set of 2. 

M3x2.5 setscrew, hex drive. Set of 10. 

M3x3 setscrew, hex drive. Set of 10 pieces. 

M3x4 setscrew, hex drive. Set of 10 pieces. 

M2x5 button-head machine screw, hex drive. Set of 10 pieces. 

M3x10 button-head machine screw, hex drive. Set of 10 pieces. 

M3x6 flat-head machine screw, hex drive. Set of 10 pieces. 

High-quality ball-bearings ID x OD x thickness (mm) = 4x7x2.5mm. Set of 2 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 5x10x4. Set of 2 pieces. 

Polished chrome pin. Dia. x length = 2mm x 9.8mm. Set of 10 pieces.